Configure filter for audit

Define filtering conditions to control the scope of Telecom Discrepancy audits. These filters ensure that audits run only on the desired set of CIs, improving performance and targeting accuracy.

Before you begin

Role required: admin

About this task

Understanding Filtering Conditions in Telecom Discrepancy Audits

• Audits use filtering conditions to narrow the scope of CIs being evaluated.
• Filtering conditions are essential for narrowing down audit targets.
• You can define and modify conditions per audit instance to meet specific audit requirements.
• Filtering by discovery_source is a common condition to filter records associated with particular integration sources (e.g., TSOM and Altiplano). Additionally, you can customize the filter according to the audit requirements.
• Each version of the audit can have a different filtering condition.

The following are the audit filters:

1. Telecom Logical Connections Discrepancy Audit: This audit runs at the logical connection table. The default filter condition is defined as discovery_source like TSOM. This condition is applied on each CI in the logical connection table.
2. Telecom Network Topology Discrepancy Audit: This audit runs at the network topology table. The default filter condition is defined as discovery_source like TSOM. This condition is applied on each CI in the network topology table.
3. Telecom Discrepancy Audit: This audit runs at the relationships table. The default filter condition is defined as discovery_source like TSOM. This condition is applied on each CI at the equipment level.

Procedure

1. Navigate to All > Certification > Filters.

2. Select New.

   The certification filter interface appears.

3. Fill in the fields.

   For more guidance, see Create a filter.

4. Add the filter conditions.

   For example, Discovery source contains TSOM.

5. Select Submit.

   The filter is created.

Result

You can use the filter in the logical connection audit.

Related topics

Run Telecom Discrepancy audit

Example for Telecom Discrepancy Audit and Remediation

Telecom discrepancy identification and reconciliation

Configure attribute value discrepancy in CMDB 360

Control CI attribute updates using Reconciliation rules